How To Flash Stock ROM Firmware (Sp Flashtools)

This simple guild will teach you how to flash Stock Rom firmware using SP flashtools to your Android smartphone and tablets without any issue. Here, on this page you will find a direct link to download latest Sp Flashtools and older version but i will recommend you to always use the newer version.

Flashtools: download the latest flashtools from and select from the list windows or Mac.

Driver: Now we need to download  VCOM driver and install it on your computer. In case if you have already installed USB driver on your computer skip this step.

Firmware: I believe you might already downloaded your Android smartphone Stock Rom firmware of your choice? if not you can download it from

Step 1: Download your stock firmware file given from above link and extract it on your computer. You will find SP flash tool and Android scatter file after extracting.

Step 2: Next, switch off your smartphone and remove the battery (it is removable).


Step 3: Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will find “Flash_tool.exe” file in it. Launch it.

Step 4: Once SP Flash tool is launched, click on “Download” tab.

Step 5: Now, click on “scatter-loading” button in the download tab.

Step 6: Next, click on “Open Scatter File” and select the scatter file from Step 1. For reference see the image given below.

Step 7: Now click on the “Download” button to start the flashing process.

Step 8: Next, connect your  Android device to your computer through original USB cable (without battery – if it is battery removable) and press volume up or volume down button.

Step 9: The flashing process will begin momentarily, and it will get completed in a minute or two. Once it is over, you will see the “Download OK” green ring in SP Flash Tool.


Step 10: Now, close SP Flash tool on your computer and unplug your smartphone.

Leave a Reply

Your email address will not be published. Required fields are marked *