How To Root Gionee S8 And Install Philz Recovery

How To Root Gionee S8 and install TWRP Recovery for this simple guild we provided here. All Gionee S8 users can now root their device within a minute following the guide in this post.

How To Root Gionee S8

Gionee S8 i is a 5.5-inch device with a resolution of 1080 pixels by 1920 pixels, which runs on Android 6.0 Marshmallow from the box and it features 4GRAM and 64G Internal Storage. it is powered by powered by octa-core MediaTek Helio P10 processor MediaTek MT6755. Gionee S8 packs a 16MP primary camera and 8 MP for selfies.

We are going to guide you on how to Install Philz Recovery on your Gionee S8 then Root it via SuperSU. I believe many using this device have googled on how to root without getting any good result worry not with this ported Philz recovery for Gionee S8 which will help you root your device in a minute and give you the freedom you need to explore your device the way you like it. Read the tutorial below to the end so that you can root your Gionee S8

Things You Need

To Unlock the bootloader of your Device

Twrp Recovery Gionee S8

VCom Drivers Go Here

Sp Flash Tool Download

Download SuperSU.zip here   then save it in your phone memory, not SD card

Feature Of The TWRP Recovery

1. NVRAM backup

2. boot.img backup

3. Recovery.img backup

4. Uboot backup

5. Emmc repair

6. Recovery.img and boot.img install/flash

7.more features now working.

8.Most features are working

9. TWRP features working correctly…

Disclaimer

We are not responsible if you brick your phone at the process of flashing the recovery

How To Install Recovery On Gionee S8

1. Connect your device to your PC

2. Send the SuperSu to your external memory card

3. Discount and put your Phone off

3. The Gionee S8  TWRP Recovery you downloaded unzip it on your desktop

4. Launch your Sp Flash Tools

5. Click load the scatter file from the Sp Flash Tools

6. Navigate and select the Android_scatter.txt file in the unzip Twrp folder

7. Then tick just recovery in the Sp flash tools

8. In the select option on Sp flash tools put Download only

9. Click Download

10.After doing the above Connect your switched off device (with battery inside) to the PC via USB cord

12. A progress bar should start running

13.Wait till you get a Success message (green circle with OK), do not interrupt before then

Vola you have successfully flash recovery on your Ulefone Gemini next thing to do is to root your device, please use the SuperSu provided in this post other versions of SuperSu may not work for you.

How To Root Gionee S8

Immediately after flashing your recovery Boot to recovery mode (power off your device then Hold power button and Volume Key same for five Sec.)In the TWRP mode, it may ask you to swipe to allow modification of System partition, tap Read Only.If it offer to root the phone, select NoClick install on your recovery then navigate to the storage you have your SuperSu.zip select it to root your device After Flashing navigate back and reboot

Leave a Reply

Your email address will not be published. Required fields are marked *

?