How to root the Tecno Camon CX

These are the simple instructions on how to root Tecno Camon CX using the adb and fastboot tools on Windows Computer. The Tecno Camon CX runs on Android 7.0 (Nougat)  powered by Mediatek Chip: MT6750T SoC

How to root Tecno Camon CX

Step 1:  Follow this our simple detailed instruction on how to install adb fastboot and Unlocking the Bootloader of the Tecno Camon CX.

Step 2: Download custom Philz recovery or Twrp recovery  by team hovatek and copy into the same folder as the fastboot.exe and adb.exe in the step 1.

Step 3: Download SuperSU 2.78.zip  to flash through recovery to gain root access to our Tecno Camon CX smartphone device.

Step 4: Now, Copy SuperSU.zip to the phone’s External storage (SD card).

 

Step 5: boot into Fastboot by Enable USB Debugging on Your Gionee A1. To enable Developers Option: Open Settings > About Phone > Tap on the Built Number for 6-8 times until developers option is enabled.

Step 6: Now, Again Go Back to the Settings > Developers Option > Enable OEM unlocking and USB Debugging.

Step 7: Connect your Gionee A1 to the PC via USB cord while switched On.

Step 8: Download and install the Minimal ADB and fastboot tools on your computer.

Image result for install the Minimal ADB and fastboot

Step 9: Once, Installation is completed Launch the Minimal ADB and fastboot tools.

how to root Tecno Camon CX

Step 10: Now, you will be able to see the following command window.

how to root Tecno Camon CX

Step 11: Now, in the command window type: Adb devices and press enter from the keyboard. You will be able to see the list of Android devices attached to the computer.

how to root Tecno Camon CX

Step 12: Once the device gets detected, boot it into Fastboot by running the following command (press Enter after the command) adb reboot-bootloader

Step 13: When the phone enters Fastboot, flash the Philz or Twrp recovery to the phone by typing this command fastboot boot recovery.img (then pressing Enter)

Step 14: The phone should automatically boot into Philz recovery mode. In Philz recovery, you use the Volume buttons to navigate and Power button to select.

Step 15: Select Install Zip, Navigate to the location of the SuperSU2.78.zip on the SD Card and select it

Step 16: Wait till flashing is complete. If you are prompted to fix root, select No.

Step 17: Reboot the phone normally. Confirm Root by installing and running Root Checker.

Important:

[*] Big thanks to Team hovatek for providing the Phiz and Twrp recovery for Tecno Camon CX smartphone.

[*] Unlocking your bootloader also void your warranty. So, beware.

[*] Firmware: If you are looking for the original firmware for your device then head over to Download Tecno firmware for all devices page

One response to “How to root the Tecno Camon CX”

  1. windows apps says:

    Do you mind if I quote a couple of your articles as long as I provide credit and sources back to
    your site? My blog site is in the very same niche as yours
    and my users would really benefit from some of the information you provide here.
    Please let me know if this alright with you.
    Regards!

Leave a Reply

Your email address will not be published. Required fields are marked *

?