How to unlock Gionee A1 Bootloader

These are the instructions on how to Unlock Gionee A1 Bootloader using the fastboot tools on Windows Computer.

Requirements: Your device should have atleast 20 percent or above battery to follow the instructions.

How to Unlock Gionee A1 Bootloader

Step 1: Download and install Gionee A1 USB driver on your computer. If Gionee A1 USB drivers are already installed on your computer then skip this step.

Step 2: Now, you have to Enable USB Debugging on Your Gionee A1. To enable Developers Option: Open Settings > About Phone > Tap on the Built Number for 6-8 times until developers option is enabled.

Step 3: Now, Again Go Back to the Settings > Developers Option > Enable OEM unlocking and USB Debugging.

Step 4: Now, Power off your Gionee A1 Device.

Step 5: Connect your Gionee A1 Device to the computer.

Step 6: Download and install the Minimal ADB and fastboot tools on your computer.

Image result for install the Minimal ADB and fastboot

Step 7: Once, Installation is completed Launch the Minimal ADB and fastboot tools.

Image result for install the Minimal ADB and fastboot

Step 8: Now, you will be able to see the following command window.

Image result for minimal adb and fastboot

Step 9: Now, in the command window type: Adb devices and press enter from the keyboard. You will be able to see the list of Android devices attached to the computer.

how to Unlock Gionee A1 Bootloader

Step 10: Once the device gets detected, boot it into Fastboot by running the following command (press Enter after the command) adb reboot-bootloader

Step 11: Now, The phone should enter Fastboot (black screen with only fastboot written at the top or bottom)

Step 12: Now, run the bellow command why your phone still In Fastboot (press Enter after the command)

Step 13: In command, type fastboot oem unlock (press Enter after the command)

and) You should get a prompt on the device asking you to confirm Bootloader unlock, press the volume up button for Yes

how to Unlock Gionee A1 Bootloader

Step 14: Now, You should now get a success message. Reboot the device by running this command fastboot reboot (press Enter after the command)

Important:

[*] Unlocking the Bootloader will delete your personal data, pictures, apps etc from your device. So, backup your personal data before following the above tutorial.

[*] Unlocking your bootloader also void your warranty. So, beware.

[*] Firmware: If you are looking for the original firmware for your device then head over to Download Gionee firmware for all devices page

Leave a Reply

Your email address will not be published. Required fields are marked *

?